Camera Kits

AIVION AZM-FS10L Block Camera

Full-HD 10x Optical Zoom Module

Features

  • 1/3 inch CMOS image sensor (approx. 2.1 million effective pixels) with Progressive scan
  • WDR (Wide Dynamic Rage) Function
  • Video signals output HD LVDS : Digital ITU-R BT.1120 (YCbCr4:2:2 16bits)
  • 10x optical zoom lens with F1.6 aperture(optical zoom + digital zoom = 120x)
  • Day and Night ICR for infrared cut filter
  • Privacy Zone Masking function
  • Communications protocol supported to be controlled remotely (SONY-VISCA)
  • High performance functions like Digital Noise Reduction, Defog, Back Light Compensation, Motion Detection, Digital Image stabilizer, Digital Slow Shutter, Image flip, High Light Compensation

AZM Productline

AZM FSL30
Specifications AZM-FS10L AZM-FS20L AZM-FS30L AZM-FS36L
Sensor Image Sensor 1/3” Progressive CMOS
(Approx. 2.1 mega)
1/3” Progressive CMOS
(Approx. 2.1 mega)
1/3” Progressive CMOS
(Approx. 2.1 mega)
1/1.9”Progressive CMOS
(Approx. 2.3 mega)
Scanning System 16:9 Progressive
Sync. System Internal
Effective Pixel 1920(H) x 1080(V) 1920(H) x 1080(V) 1944(H) x 1092(V) 1920(H) x 1080(V)
Min. Illumination 0.2Lux (Day),
0.1Lux (Night),
0.005Lux(DSS on)
0.2Lux (Day),
0.1Lux (Night),
0.005Lux(DSS on)
Color(1/30s) : 0.5 lux ,
BW(1/30s) : 0.1lux Color DSS(1/7.5s) : 0.125 lux ,
BW DSS(1/7.5s) : 0.025 lux
0.1Lux (Day),
0.05Lux (Night),
0.002Lux(DSS on)
Optics Lens 10x optical Zoom,
f=4.7~47mm, F1.6 ~ F3.0
20x optical Zoom,
F=4.7~94mm, F1.6 ~ F3.5
30x optical Zoom,
F=4.3~129mm, F1.6 ~ F4.7
36x optical Zoom,
F=6~216mm, F1.5 ~ F4.8
Zoom 10x optical zoom + 12x digital zoom = 120x 20x optical zoom + 12x digital zoom = 240x 30x optical zoom + 32x digital zoom = 960x 36x optical zoom + 12x digital zoom = 432x
Focus Near/Far, Auto/Manual/One Push
Angle of View(H) 57.7 degrees(WIDE),
6.4 degrees(TELE)
57.4 degrees(WIDE),
3.2 degrees(TELE)
58.9 degrees(WIDE),
2.11 degrees(TELE)
60 degrees(WIDE),
2.0 degrees(TELE)
Functions Back Light Compensation WDR/BLC,
HLC(High Light compensation)
WDR/BLC,
HLC(High Light compensation)
WDR/BLC WDR/BLC,
HLC(High Light compensation)
Exposure Auto / Manual
White Balance Auto(3,000°K~8,000°K) / ATW(1,900°K~11,000°K) / Manual Auto(3,000°K~8,000°K) / ATW(1,900°K~11,000°K) / Manual Auto / One Push / Manual / Indoor / Outdoor Auto(3,000°K~8,000°K) / ATW(1,900°K~11,000°K) / Manual
Day & Night System AGC / TDN(ICR) AGC / TDN(ICR) Auto / Day / Night / Ext-in AGC / TDN(ICR)
Electronic Shutter NTSC: 1/30~1/30000, PAL: 1/25~1/30000,
DSS( ~ 1/1sec)
NTSC: 1/30~1/30000, PAL: 1/25~1/30000,
DSS( ~ 1/1sec)
NTSC: 1/30~1/30000, PAL: 1/25~1/30000,
DSS Off/x2/x4 (/x8:60 or 50fps mode only)
NTSC: 1/30~1/30000, PAL: 1/25~1/30000,
DSS( ~ 1/1sec)
Functions Privacy Mask, Image Mirror, 3DNR, Flicker-less, Sharpness, Defog, DIS(Digital Image stabilizer), NegArt, Freeze, B&W Privacy Mask, Image Mirror, 3DNR, Flicker-less, Sharpness, Defog, DIS(Digital Image stabilizer), NegArt, Freeze, B&W HLC / DNR / Mirror / Sharpness / ACE / Defog / Freeze / Gamma Privacy Mask, Image Mirror, 3DNR, Flicker-less, Sharpness, Defog, DIS(Digital Image stabilizer), NegArt, Freeze, B&W
Video Outputs Digital Output(LVDS) 1920x1080p@25,30,50,60 1920x1080i@50,60
1280x720p@25,30,50,60
ITU-R BT.1120 YcbCr4:2:2 16bits, 20bits(single LVDS mode)
1920x1080p@25,30,50,60 1920x1080i@50,60
1280x720p@25,30,50,60
ITU-R BT.1120 YcbCr4:2:2 16bits, 20bits(single LVDS mode)
1920x1080p@25,30,50,60 1920x1080i@50,60
1280x720p@25,30,50,60
1920x1080p@25,30,50,60 1920x1080i@50,60
1280x720p@25,30,50,60
ITU-R BT.1120 YcbCr4:2:2 16bits, 20bits(single LVDS mode)
CVBS (NTSC/ PAL) Analog Composite (1V ± 0.2 Vp-p) NTSC/PAL Analog Composite (1V ± 0.2 Vp-p) NTSC/PAL Analog Composite (1V ± 0.2 Vp-p) NTSC/PAL
Control Interface UART (5V level) SONY-VISCA protocol
8bits data, 1 stop bit, no parity, 2400~115200bps
General Operation Temperature -20°C ~ 60°C -20°C ~ 60°C -10°C ~ 50°C -20°C ~ 60°C
Power Input 12VDC (7V to 15VDC) 12VDC (7V to 15VDC) 9V to 15V DC 12VDC (7V to 15VDC)
Power consumption Max 4W (2.5W Lens inactive, 3.2W Lens active) Max 5W (3.2W Lens inactive, 3.9W Lens active) 500mA Max 5W (3.2W Lens inactive, 3.9W Lens active)
Mass Approx. 140g (5.0 oz.) Approx. 240g (8.5 oz.) Approx. 240g (8.5 oz.) Approx. 265g (9.35 oz.)
Dimensions 67(D) x 43.6(W) X 45.3(H) mm 87(D) x 50(W) X 60(H) mm 93(D) x 50(W) X 60(H) mm 119.35(D) x 51.8(W) x 54.05(H) mm

AZM-FS10L Camera Dimensions

AZM Dimensions

TL7750 HD-SDI & HDMI Camera Evaluation Kit

Partnumber: TL7750-EVK-AZM-FS10L

The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours. You need for a complete test environment a USB to serial adapter (PS-TE10A12) and a 12 V Power Supply (PS-TE10A12).

Parts:

  • AZM-FS10L Camera
  • HD-SDI and HDMI Board (TL7750)
  • Power supply and control interface board (EK-PA1100)
  • Bracket and screws (TL-EVK-BRA)
  • MCX to BNC connector cable (CK-MCX-BNC)
  • Base cable kit (TLCK-B):
    • 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
    • 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm

TL7751 HD-SDI Camera Evaluation Kit

Partnumber: TL7751-EVK-AZM-FS10L

The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours. You need for a complete test environment a USB to serial adapter (PS-TE10A12) and a 12 V Power Supply (PS-TE10A12).

Parts:

  • AZM-FS10L
  • Dual HD-SDI Board (TL7751)
  • Power supply and control interface board (EK-PA1100)
  • Bracket and screws (TL-EVK-BRA)
  • MCX to BNC connector cable (CK-MCX-BNC)
  • Base cable kit (TLCK-B):
    • 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
    • 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm

TL7752 HDMI Camera Evaluation Kit

Partnumber: TL7752-EVK-AZM-FS10L

The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours. You need for a complete test environment a USB to serial adapter (PS-TE10A12) and a 12 V Power Supply (PS-TE10A12).

Parts:

  • AIVION Block Camera AZM-FS10L
  • HDMI Board (TL7752)
  • Power supply and control interface board (EK-PA1100)
  • Bracket and screws (TL-EVK-BRA)
  • High Speed HDMI-A Cable (TL-EVK-HDMI)
  • Base cable kit (TLCK-B):
    • 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
    • 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm

Optional Parts Evaluation Kit

Partnumber: PS-TE10A12

12 V AC to DC external power supply designed for test & measurement and industrial applications. The Power Supply has a interchangeable blade kit for USA, Europe, United Kingdom and Australian.

Partnumber: TL-EVK-USB-SA

This USB to serial adapter enables you to connect a serial device to a free USB port. Connector: 1 x USB 1.1 type A male > 1 x serial RS-232 DB9 male

TL6735 USB Camera Evaluation Kit

Partnumber: TL6735-EVK-AZM-FS10L

The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.

Parts:

  • AZM-FS10L Block Camera
  • USB 3.0 Board (TL6735)
  • Bracket and screws (TL-EVK-BRA)
  • USB 3.0 Cable with a USB 3.0-A male and a USB 3.0 micro-B male connector
    (TL-EVK-USB3.0-A-microB)
  • 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm (TLCK-K30-200)