Camera Interfaces
SL4655 FHD LVDS to analog YPbPr
FHD LVDS to analog YPbPr Transmitter for Block Cameras
The SL4655 interface from AIVION SL4655 is a small form factor analog YPbPr FHD video transmitter. Camera LVDS video input signals are demultiplexed, processed, converted to analog and output over 6pin board to wire connector. Camera control is accomplished by a transparent full duplex communication channel. Physical interface between camera and camera controller / PC is based on RS232, 3.3V TTL or RS485(optional) level. TLCK-B5 cable kit is included and contains 30wire micro coaxial cable for connecting SL4655 to the camera as well as 10wire power supply and serial control cable harness and a 6wire cable harness for the video output.
Features
- High Definition analog HD-YPbPr output
- Seamless connection to zoom camera blocks with industry standard LVDS interface
- RS232 and TTL level serial camera control interface
- RS485 camera control interface (optional)
- Supply voltage 9V to 12V DC regulated
- RoHS and UL/UR compliant
- TLCK-B5 Cable Kit included
Supported Video Standards
- 1080i 60Hz, 59.94Hz and 50Hz
- 1080p 30Hz, 29.97Hz and 25Hz
- 720p 60Hz, 59.94Hz, 60Hz, 25Hz, 29.97Hz and 30Hz
Blockdiagram SL4655

SL4655 FCB-EV9500L FHD LVDS to analog YPbPr Camera Evaluation Kit
Partnumber: SL4655-EVK-FCB-EV9500L
The evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.
Parts:
- Sony FCB-EV9500L Camera
- FHD LVDS to analog YPbPr Board (SL4655)
- Base cable kit (TLCK-B5):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm (TLCK-FL10-150)
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm (TLCK-K30-200)
- 6 pin flying leads cable for YPbPr, length 15cm (TLCK-FL06-150)
- Power supply and control interface board (EK-PA1100)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector (TL-EVK-USB2-A-MICROB)
SL4655 FCB-EV7520A FHD LVDS to analog YPbPr Camera Evaluation Kit
Partnumber: SL4655-EVK-FCB-EV7520A
The evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.
Parts:
- Sony FCB-EV7520A Camera
- FHD LVDS to analog YPbPr Board (SL4655)
- Base cable kit (TLCK-B5):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm (TLCK-FL10-150)
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm (TLCK-K30-200)
- 6 pin flying leads cable for YPbPr, length 15cm (TLCK-FL06-150)
- Power supply and control interface board (EK-PA1100)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector (TL-EVK-USB2-A-MICROB)
The SL4656 FHD LVDS to analog YPbPr Interface supports following HD Cameras:
- Sony FCB-EV7520A and the legacy Sony HD Block Cameras
- Tamron Block Cameras
- AIVION AZM Block Cameras
- Every other module camera with LVDS Output
Sony FCB-EV7520A
Name | FCB-EV7520A |
Datasheet | FCB-EV7520A |
Video Output Digital | Digital : Y / Pb / Pr 4:2:2 (LVDS) (Y: 8 bit, C: 8 bit, Vsync, Hsync, Field, Clock) (SMPTE274M/SMPTE296M) |
Video Output Analog | (CVBS) PAL / NTSC |
Camera Control Interface | VISCA protocol (CMOS 5V Level) ; Baud Rate : 9.6 kbps, 19.2 kbps, 38.4 kbps, 115.2 kbps, Stop bit : 1 bit |
Effectiv numbers of Pixels | Approx. 2.130.000 pixels |
Image sensor | 1/2,8- type Exmor R CMOS |
Signal System(HD) | 1080p/60, 1080p/59.94, 1080p/50, 1080p/30, 1080p/29.97, 1080p/25, 1080i/60, 1080i/59.94, 1080i/50, 720p/60, 720p/59.94, 720p/50, 720p/30, 720p/29.97, 720p/25 |
Lens | 30x optical zoom ; f= 4.3 mm to 129 mm, F1.6 to F4.7 |
Horizontal viewing angle (wide to tele) | 63.7° to 2.3° |
Digital Zoom | 12x |

Tamron Module Cameras
Name | MP1010M-VC | MP1110M-VC | MP2030M-GS |
Datasheet | MP1010M-VC | MP1110M-VC | MP2030M-GS |
Video Output Digital | LVDS (Y/Pb/Pr 4:2:2) | LVDS (Y/Pb/Pr 4:2:2) | LVDS |
Video Output Analog | CVBS | Analog VBS | |
Camera Control Interface | Visca Protocol | Visca Protocol | Visca Protocol |
Effectiv numbers of Pixels | Approx. 4,080,000 pixels | Approx. 4,080,000 pixels | Approx. 3,190,000 pixels |
Image sensor | 1/3-type CMOS (Progressive Scan) | 1/3-type CMOS (Progressive Scan) | 1/1.8 type Global shutter SONY IMX265LQR-C CMOS (Progressive Scan) |
Signal system (HD) | 1080p/60, 1080p/50, 1080p/30, 1080p/25, 1080i/60,1080i/50, 720p/60, 720p/50, 720/30p, 720/25p | 1080p/60, 1080p/59.94, 1080p/50, 1080p/30, 1080p/29.97, 1080p/25, 1080i/60, 1080i/59.94, 1080i/50, 720p/60, 720p/59.94, 720p/50, 720p/30, 720p/29.97, 720p/25 | 1080p/60, 1080p/59.94, 1080p/50, 1080p/30, 1080p/25, 1080i/60, 1080i/59.94, 1080i/50, 720p/60, 720p/50 |
Lens | 10x optical zoom f=3.3 mm (wide) to 33.0 mm (tele) F1.8 to F3.4 | 10x optical zoom f=3.3 mm (wide) to 33.0 mm (tele) F1.8 to F3.4 | 30x optical zoom Nominal Value: f = 6.5 mm - 195 mm F1.6 to F5.3 |
Horizontal viewing angle (wide to tele) | 58.2 degrees to 6.9 degrees | 58.2 degrees to 6.9 degrees | 54 degrees to 2.0 degrees |
Digital Zoom | 16x | 16x |

AIVION Cameras
Name | AZM-FS10L | AZM-FS20L | AZM-FS30L2 | AZM-WQHS36L-LL |
Datasheet | AZM-FS10L | AZM-FS20L | AZM-FS30L2 | AZM-WQHS36L-LL |
Video Output Digital | LVDS Digital ITU-R BT.1120 - YcbCr4:2:2 16bits | LVDS Digital ITU-R BT.1120 - YcbCr4:2:2 16bits, 20bits (single LVDS mode) | LVDS Digital ITU-R BT.1120 - YcbCr4:2:2 16bits, 16bits | LVDS |
Video Output Analog | SD CVBS (NTSC/PAL), 1.0Vp-p 75, Composite | SD CVBS (NTSC/PAL), 1.0Vp-p 75, Composite | HD-Analog / CVBS(※ Test Only) | |
Camera Control Interface | Visca Protocol | Visca Protocol | Visca Protocol | Visca Protocol |
Effectiv numbers of Pixels | Approx. 2,100,000 pixels | Approx. 2,100,000 pixels | Approx. 2,100,000 pixels | Approx. 5,450,000 pixels |
Image sensor | 1/2.8 inch Sony Starvis CMOS Sensor (Progressive Scan) | 1/3-type CMOS (Progressive Scan) | 1/2.8 inch Sony Starvis CMOS Sensor (Progressive Scan) | 1/1.8" Sony IMX178LQJ-C CMOS Sensor (Progressive Scan) |
Signal system (HD) | 1920x1080p@25,30,50,60 1920x1080p@29.97,59.94 (optional) 1920x1080i@50,60 1920x1080i@59.94 (optional) 1280x720p@25,30,50,60 1280x720p@29.97,59.94 (optional) |
1920x1080p@25,30,50,60 1920x1080i@50,60 1280x720p@25,30,50,60 | 1920x1080p@25,30,50,60,29.97,59.94 1920x1080i@50,60,59.94 1280x720p@25,30,50,60,29.97,59.94 | 1440p 30(25)fps, 1080p 30(25)fps, 720p 30(25)fps |
Lens | Optical 10x, f = 4.7 mm to 47.0 mm (F 1.6 to F 3.0) | Optical 20x, f = 4.7 mm to 94 mm (F 1.6 to F 3.5) | Optical 30x, f = 4.7 mm to 141 mm (F 1.5 to F 4.0) | Optical x36, f = 6.0 mm to 216 mm (F1.5 to F4.8) |
Horizontal viewing angle (wide to tele) | 57.7 degrees(WIDE), 6.4 degrees(TELE) | 57.4 degrees(WIDE), 3.2 degrees(TELE) | 60.5 degrees(WIDE) to 2.3 degrees(TELE) | 49.27 degrees(WIDE) to 1.85 degrees(TELE) |
Digital Zoom | 12x | 12x | 12x | 32x |
SL4655 MP1010M-VC FHD LVDS to analog YPbPr Camera Evaluation Kit
Partnumber: SL4655-EVK-MP1010M-VC
The evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.
Parts:
- Tamron MP1010M-VC Camera
- FHD LVDS to analog YPbPr Board (SL4655)
- Base cable kit (TLCK-B5):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm (TLCK-FL10-150)
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm (TLCK-K30-200)
- 6 pin flying leads cable for YPbPr, length 15cm (TLCK-FL06-150)
- Power supply and control interface board (EK-PA1100)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector (TL-EVK-USB2-A-MICROB)
SL4655 MP3010M-EV FHD LVDS to analog YPbPr Camera Evaluation Kit
Partnumber: SL4655-EVK-MP3010M-EV
The evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.
Parts:
- Tamron MP3010M-EV
- FHD LVDS to analog YPbPr Board (SL4655)
- Base cable kit (TLCK-B5):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm (TLCK-FL10-150)
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm (TLCK-K30-200)
- 6 pin flying leads cable for YPbPr, length 15cm (TLCK-FL06-150)
- Power supply and control interface board (EK-PA1100)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector (TL-EVK-USB2-A-MICROB)
SL4655 Evaluation Kit
Partnumber: SL4655-EVK
The evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.
Parts:
- FHD LVDS to analog YPbPr Board (SL4655)
- Base cable kit (TLCK-B5):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm (TLCK-FL10-150)
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm (TLCK-K30-200)
- 6 pin flying leads cable for YPbPr, length 15cm (TLCK-FL06-150)
- Power supply and control interface board (EK-PA1100)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector (TL-EVK-USB2-A-MICROB)
SL4655 Production Kit
Partnumber: SL4655
Production kit with all items needed for production. Powerful, cheap, competitive.
Parts:
- FHD LVDS to analog YPbPr Transmitter (SL4655)
- Base cable kit (TLCK-B5):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm (TLCK-FL10-150)
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm (TLCK-K30-200)
- 6 pin flying leads cable for YPbPr, length 15cm (TLCK-FL06-150)
Base Cable Kit
Partnumber: TLCK-B5
Cable kit for the SL4655 interface board
Parts:
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm (TLCK-FL10-150)
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm (TLCK-K30-200)
- 6 pin flying leads cable for YPbPr, length 15cm (TLCK-FL06-150)
Optional Parts Evaluation Kit
12 V AC to DC external power supply (PS-TE10A12)
- 12 V AC to DC external power supply designed for test & measurement and industrial applications. The Power Supply has a interchangeable blade kit for USA, Europe, United Kingdom and Australian.
USB 2.0 Cable (TL-EVK-USB2-A-MICROB)
- USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector
USB to serial adapter cable (TL-EVK-USB-SA)
- This USB to serial adapter enables you to connect a serial device to a free USB port. Connector: 1 x USB 1.1 type A male > 1 x serial RS-232 DB9 male
SL4655 Camera Evaluation Kit
Partnumber: SL4655-EVK-AZM-FSXXL
The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.
Parts:
- AZM-FS10L, AZM-FS20L, AZM-FS30L or AZM-WQHS36L-LL
- FHD LVDS to analog YPbPr Board (SL4655)
- Base cable kit (TLCK-B5):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm (TLCK-FL10-150)
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm (TLCK-K30-200)
- 6 pin flying leads cable for YPbPr, length 15cm (TLCK-FL06-150)
- Power supply and control interface board (EK-PA1100)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector (TL-EVK-USB2-A-MICROB)