Camera Interfaces
TL 4K1152 4K HDMI Interface
3.4Gbps HDMI 1.4b Transmitter Interface for Sony 4K Block Cameras
The TL4K1152 is a small form factor digital serial video transmitter from AIVION. The TL4K1152 is the latest addition to our interface product line. Small form factor with an attractive price are some of the main features of the TL4K1152. It supports the new trend setting Sony block camera FCB-ER8300 via an HDMI output. Camera control can be managed through an RS232 port. Via the available USB2 interface firmware updates can be obtained.
Features
- Ultra High Definition video output
- Seamless connection to Sony FCB-ER8550, ER8530,ER8300 and FCB-ES8230 4K camera blocks
- Integrated input signal equalizer
- Ultra high speed 3.4Gbps cable driver
- Up to 3840x2160p @ 30fps HDMI 1.4b video output + UHD, FHD, HD video format support
- RS232 level serial camera control interface
- Supply voltage 7V to 12V DC regulated
- Ultra low power - 150mW@8V supply voltage only
Quick Specification
- FCB-ER8300 interface on 30pin microcoax connector
- Up to 4K 3840x2160@30fps HDMI 1.4b video output
- Supply voltage 7V to 12V DC, 8V DC recommended
- Operating ambient temperature range -10°C to +60°C
- Operating humidity range 20% to 80%
- Power consumption only 0.15W with 8V DC supply voltage
- Board size (L x W) 46mm x 30mm
- Wire/cable kit for camera and external interconnect
- RoHS compliant (2002/05/EG and 2011/65/EU)
- UL/UR compliant
Blockdiagram TL4K1152
The TL4K1152 3.4Gbps HDMI 1.4b Transmitter supports Sony 4K Block Cameras
| Model | Video output | Camera control interface | Image Device | Effective Pixels | Horizontal Viewing Angle | Lens Value |
| FCB‑ER8300 | Minimum Illumination Color: 0.75 lx (F1.8, AGC on, 1/30 s) High Sensitivity Mode Color: 3 lx (F1.8, AGC on, 1/30 s) Normal Mode | VISCA (CMOS 3.1 V level) Baud rate: 9.6 Kbps, 19.2 Kbps, 38.4 Kbps, 57.6 Kbps, 115.2 Kbps, Stop bit: 1 bit | Progressive scan CMOS Image Sensor 1/2.3 type "Exmor R" | Approx. 8.93 Mega Pixels | 73.4° (wide end) to 6.4° (tele end) | 12x optical zoom, f = 3.9 mm (wide) to 46.8 mm (tele), F1.8 to F2.0 |
| FCB‑ER8530 | Digital Y/Cb/Cr 4:2:2 8 bits component, R/G/B 4:4:4 8bits component, similar to CEA-861-F HDMI1.4b | VISCA protocol (CMOS 3.1V) | 1/2.5-type Exmor CMOS | 8.51 MPixels | Approx. 70.2 degrees (Wide end, Image stabilizer Off), Approx. 4.1 degrees (Tele end, Image stabilizer O) | 20x optical zoom, f = 4.4 mm (Wide), 88.4 mm (Tele), F2.0 to F3.8 |
| FCB‑ER8550 | Digital Y/Cb/Cr 4:2:2 8 bits component, R/G/B 4:4:4 8bits component, similar to CEA-861-F HDMI1.4b | VISCA protocol (CMOS 3.1V) | 1/2.5-type Exmor CMOS | 8.51 MPixels | Approx. 70.2 degrees (Wide end, Image stabilizer Off), Approx. 4.1 degrees (Tele end, Image stabilizer O) | 20x optical zoom, f = 4.4 mm (Wide), 88.4 mm (Tele), F2.0 to F3.8 |
| FCB‑ES8230 | Digital Y/Cb/Cr 4:2:2 8 bits component, R/G/B 4:4:4 8bits component, similar to CEA-861-F HDMI1.4b | VISCA protocol (CMOS 3.1V) | 1 type Exmor CMOS | 20.47 MPixels | approx. 64.6 degrees (Wide end, Image stabilizer Off) Approx. 6.1 degrees (Tele end, Image stabilizer Off) | 12x optical zoom, f = 9.3 mm (Wide), 111.6 mm (Tele), F2.8 to F4.5 |
TL4K1152 Sony FCB ER-8300 HDMI Camera Evaluation Kit
Partnumber: TL4K1152-EVK-FCB-ER8300
The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.
Parts:
- Sony FCB ER-8300
- HDMI Board (TL4K1152)
- Base cable kit (TLCK-B):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- Power supply and control interface board (EK-PA1100)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector (TL-EVK-USB2-A-MICROB)
- Bracket and screws (TL-EVK-BRA)
- High Speed HDMI Cable. HDMI-A male > HDMI-A male 4K 2 meter (TL-EVK-HDMI)
TL4K1152 Sony FCB ER-8530 HDMI Camera Evaluation Kit
Partnumber: TL4K1152-EVK-FCB-ER8530
The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.
Parts:
- Sony FCB ER-8530
- HDMI Board (TL4K1152)
- Base cable kit (TLCK-B):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- Power supply and control interface board (EK-PA1100)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector (TL-EVK-USB2-A-MICROB)
- Bracket and screws (TL-EVK-BRA)
- High Speed HDMI Cable. HDMI-A male > HDMI-A male 4K 2 meter (TL-EVK-HDMI)
TL4K1152 Sony FCB ER-8550 HDMI Camera Evaluation Kit
Partnumber: TL4K1152-EVK-FCB-ER8550
The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.
Parts:
- Sony FCB ER-8550
- HDMI Board (TL4K1152)
- Base cable kit (TLCK-B):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- Power supply and control interface board (EK-PA1100)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector (TL-EVK-USB2-A-MICROB)
- Bracket and screws (TL-EVK-BRA)
- High Speed HDMI Cable. HDMI-A male > HDMI-A male 4K 2 meter (TL-EVK-HDMI)
TL4K1152 Sony FCB ES-8230 HDMI Camera Evaluation Kit
Partnumber: TL4K1152-EVK-FCB-ES8230
The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.
Parts:
- Sony FCB ES-8230
- HDMI Board (TL4K1152)
- Base cable kit (TLCK-B):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- Power supply and control interface board (EK-PA1100)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector (TL-EVK-USB2-A-MICROB)
- Bracket and screws (TL-EVK-BRA)
- High Speed HDMI Cable. HDMI-A male > HDMI-A male 4K 2 meter (TL-EVK-HDMI)
- AIVION Visca Camera Control Software
Optional Parts Evaluation Kit
Partnumber: PS-TE10A12
12 V AC to DC external power supply designed for test & measurement and industrial applications. The Power Supply has a interchangeable blade kit for USA, Europe, United Kingdom and Australian.
Partnumber: TL-EVK-USB-SA
This USB to serial adapter enables you to connect a serial device to a free USB port. Connector: 1 x USB 1.1 type A male > 1 x serial RS-232 DB9 male
TL4K1152 Evaluation Kit
Partnumber: TL4K1152-EVK
The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours. You need for a complete test environment a USB to serial adapter (PS-TE10A12) and a 12 V Power Supply (PS-TE10A12).
Parts:
- HDMI Board (TL4K1152)
- Base cable kit (TLCK-B):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- Power supply and control interface board (EK-PA1100)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector (TL-EVK-USB2-A-MICROB)
- Bracket and screws (TL-EVK-BRA)
- High Speed HDMI Cable. HDMI-A male > HDMI-A male 4K 2 meter (TL-EVK-HDMI)
Optional Parts Evaluation Kit
Partnumber: PS-TE10A12
12 V AC to DC external power supply designed for test & measurement and industrial applications. The Power Supply has a interchangeable blade kit for USA, Europe, United Kingdom and Australian.
Partnumber: TL-EVK-USB-SA
This USB to serial adapter enables you to connect a serial device to a free USB port. Connector: 1 x USB 1.1 type A male > 1 x serial RS-232 DB9 male
TL4K1152 Production Kit
Partnumber: TL4K1152
Production kit with all items needed for production. Powerful, cheap , competitive
Parts:
- TL4K1152 Board
- Base cable kit (TLCK-B):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
Base Cable Kit
Partnumber: TLCK-B
Cable kit for the TL7050 interface board
Parts:
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
