Camera Interfaces
TL 7052 DVI (HDMI) Interface
High Definition Multimedia Interface for Block Cameras
The TL7052 is a HDMI Output Video Transceiver module from AIVION. It connects to the digital video interface of the block cameras and support several progressive and interlace HDTV formats. As no analog to digital conversion is done on these modules, excellent output image quality is achieved.
Features
- Digital 4Ch./8Ch. LVDS video input from camera
- Full automatic video input standard detection
- 3G/HD DVI video output over HDMI connector
- Native digital signal processing chain for best image quality
- Breakout of camera analog HDTV YPbPr and CVBS video
(requires TL7052 extended cable kit) - RS232 and TTL level serial control interface
- Supply voltage 5V or 12V DC regulated
- Temperature monitoring with alert function
Supported Video Standards
The following HDTV video standards are supported by the TL7052. Note that video standard availability is always dependent on the capability of the camera block used.
- 1080p output at 60Hz, 59.94Hz, 50Hz, 30Hz, 29.97Hz and 25Hz
- 720p output at 60Hz, 59.94Hz, 50Hz, 30Hz, 29.97Hz and 25Hz
- 1080i output at 60Hz, 59.94Hz and 50Hz
Blockdiagram TL7052

TL7052 MP1010M-VC Tamron Camera Evaluation Kit
Partnumber: TL7052-EVK-MP1010M-VC
The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.
Parts:
- Tamron MP1010M-VC Camera
- HDMI Board (TL7052)
- Base cable kit (TLCK-B):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- Power supply and control interface board (EK-PA1100)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector (TL-EVK-USB2-A-MICROB)
- Bracket and screws (TL-EVK-BRA)
- MCX to BNC connector cable (CK-MCX-BNC)
- AIVION Visca Camera Control Software
TL7052 MP3010M-EV Tamron Camera Evaluation Kit
Partnumber: TL7052-EVK-MP3010M-EV
The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.
Parts:
- Tamron MP3010M-EV Camera
- HDMI Board (TL7052)
- Base cable kit (TLCK-B):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- Power supply and control interface board (EK-PA1100)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector (TL-EVK-USB2-A-MICROB)
- Bracket and screws (TL-EVK-BRA)
- MCX to BNC connector cable (CK-MCX-BNC)
- AIVION Visca Camera Control Software
The TL7052 HDMI Interface supports following HD Cameras:
- Sony FCB-EV7520 and the legacy Sony HD Block Cameras
- Tamron Block Cameras
- AIVION AZM Block Cameras
- Every other module camera with LVDS Output
Sony FCB-EV7520A
Name | FCB-EV7520A |
Datasheet | FCB-EV7520A |
Video Output Digital | Digital : Y / Pb / Pr 4:2:2 (LVDS) (Y: 8 bit, C: 8 bit, Vsync, Hsync, Field, Clock) (SMPTE274M/SMPTE296M) |
Video Output Analog | (CVBS) PAL / NTSC |
Camera Control Interface | VISCA protocol (CMOS 5V Level) ; Baud Rate : 9.6 kbps, 19.2 kbps, 38.4 kbps, 115.2 kbps, Stop bit : 1 bit |
Effectiv numbers of Pixels | Approx. 2.130.000 pixels |
Image sensor | 1/2,8- type Exmor R CMOS |
Signal System(HD) | 1080p/60, 1080p/59.94, 1080p/50, 1080p/30, 1080p/29.97, 1080p/25, 1080i/60, 1080i/59.94, 1080i/50, 720p/60, 720p/59.94, 720p/50, 720p/30, 720p/29.97, 720p/25 |
Lens | 30x optical zoom ; f= 4.3 mm to 129 mm, F1.6 to F4.7 |
Horizontal viewing angle (wide to tele) | 63.7° to 2.3° |
Digital Zoom | 12x |

Tamron Module Cameras
Name | MP1010M-VC | MP1110M-VC |
Datasheet | MP1010M-VC | MP1110M-VC |
Video Output Digital | LVDS (Y/Pb/Pr 4:2:2) | LVDS (Y/Pb/Pr 4:2:2) |
Video Output Analog | CVBS | |
Camera Control Interface | Visca Protocol | Visca Protocol |
Effectiv numbers of Pixels | Approx. 4,080,000 pixels | Approx. 4,080,000 pixels |
Image sensor | 1/3-type CMOS (Progressive Scan) | 1/3-type CMOS (Progressive Scan) |
Signal system (HD) | 1080p/60, 1080p/50, 1080p/30, 1080p/25, 1080i/60,1080i/50, 720p/60, 720p/50, 720/30p, 720/25p | 1080p/60, 1080p/59.94, 1080p/50, 1080p/30, 1080p/29.97, 1080p/25, 1080i/60, 1080i/59.94, 1080i/50, 720p/60, 720p/59.94, 720p/50, 720p/30, 720p/29.97, 720p/25 |
Lens | 10x optical zoom f=3.3 mm (wide) to 33.0 mm (tele) F1.8 to F3.4 | 10x optical zoom f=3.3 mm (wide) to 33.0 mm (tele) F1.8 to F3.4 |
Horizontal viewing angle (wide to tele) | 58.2 degrees to 6.9 degrees | 58.2 degrees to 6.9 degrees |
Digital Zoom | 16x |

AIVION Cameras
Name | AZM-FS10L | AZM-FS20L | AZM-FS30L2 | AZM-WQHS36L-LL |
Datasheet | AZM-FS10L | AZM-FS20L | AZM-FS30L2 | AZM-WQHS36L-LL |
Video Output Digital | LVDS Digital ITU-R BT.1120 - YcbCr4:2:2 16bits | LVDS Digital ITU-R BT.1120 - YcbCr4:2:2 16bits, 20bits (single LVDS mode) | LVDS Digital ITU-R BT.1120 - YcbCr4:2:2 16bits, 16bits | LVDS |
Video Output Analog | SD CVBS (NTSC/PAL), 1.0Vp-p 75, Composite | SD CVBS (NTSC/PAL), 1.0Vp-p 75, Composite | HD-Analog / CVBS(※ Test Only) | |
Camera Control Interface | Visca Protocol | Visca Protocol | Visca Protocol | Visca Protocol |
Effectiv numbers of Pixels | Approx. 2,100,000 pixels | Approx. 2,100,000 pixels | Approx. 2,100,000 pixels | Approx. 5,450,000 pixels |
Image sensor | 1/2.8 inch Sony Starvis CMOS Sensor (Progressive Scan) | 1/3-type CMOS (Progressive Scan) | 1/2.8 inch Sony Starvis CMOS Sensor (Progressive Scan) | 1/1.8" Sony IMX178LQJ-C CMOS Sensor (Progressive Scan) |
Signal system (HD) | 1920x1080p@25,30,50,60 1920x1080p@29.97,59.94 (optional) 1920x1080i@50,60 1920x1080i@59.94 (optional) 1280x720p@25,30,50,60 1280x720p@29.97,59.94 (optional) |
1920x1080p@25,30,50,60 1920x1080i@50,60 1280x720p@25,30,50,60 | 1920x1080p@25,30,50,60,29.97,59.94 1920x1080i@50,60,59.94 1280x720p@25,30,50,60,29.97,59.94 | 1440p 30(25)fps, 1080p 30(25)fps, 720p 30(25)fps |
Lens | Optical 10x, f = 4.7 mm to 47.0 mm (F 1.6 to F 3.0) | Optical 20x, f = 4.7 mm to 94 mm (F 1.6 to F 3.5) | Optical 30x, f = 4.7 mm to 141 mm (F 1.5 to F 4.0) | Optical x36, f = 6.0 mm to 216 mm (F1.5 to F4.8) |
Horizontal viewing angle (wide to tele) | 57.7 degrees(WIDE), 6.4 degrees(TELE) | 57.4 degrees(WIDE), 3.2 degrees(TELE) | 60.5 degrees(WIDE) to 2.3 degrees(TELE) | 49.27 degrees(WIDE) to 1.85 degrees(TELE) |
Digital Zoom | 12x | 12x | 12x | 32x |
TL7052 Sony FCB EV-7520 Camera Evaluation Kit
Partnumber: TL7052-EVK-FCB-EV7520
The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.
Parts:
- Sony FCB EV-7520
- HDMI Board (TL7052)
- Base cable kit (TLCK-B):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- Power supply and control interface board (EK-PA1100)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector (TL-EVK-USB2-A-MICROB)
- Bracket and screws (TL-EVK-BRA)
- High Speed HDMI Cable. HDMI-A male > HDMI-A male 4K 2 meter (TL-EVK-HDMI)
- AIVION Visca Camera Control Software
TL7052 Sony FCB-EV9500L Camera Evaluation Kit
Partnumber: TL7052-FCB-EV9500L
The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.
Parts:
- Sony FCB-EV9500L
- HDMI Board (TL7052)
- Base cable kit (TLCK-B):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- Power supply and control interface board (EK-PA1100)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector (TL-EVK-USB2-A-MICROB)
- Bracket and screws (TL-EVK-BRA)
- High Speed HDMI Cable. HDMI-A male > HDMI-A male 4K 2 meter (TL-EVK-HDMI)
- AIVION Visca Camera Control Software
TL7052 Evaluation Kit
Partnumber: TL7052-EVK
The evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours. You need for a complete test environment a USB to serial adapter (PS-TE10A12) and a 12 V Power Supply (PS-TE10A12).
Parts:
- HDMI Board (TL7052)
- Base cable kit (TLCK-B):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- Power supply and control interface board (EK-PA1100)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector (TL-EVK-USB2-A-MICROB)
- Bracket and screws (TL-EVK-BRA)
- High Speed HDMI Cable. HDMI-A male > HDMI-A male 4K 2 meter (TL-EVK-HDMI)
- AIVION Visca Camera Control Software
TL7052 Production Kit
Partnumber: TL7052
Production kit with all items needed for production. Powerful, cheap , competitive
Parts:
- TL7052 HDMI Board
- TLCK-B | Base cable kit:
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
Base Cable Kit
Partnumber: TLCK-B
Cable kit for the TL7052 interface board
Parts:
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
Extended Cable Kit
Partnumber: TL7050CK-E
Extended Cable kit for the TL7052 interface board. This cable kit is for solutions with analog video breakout and RS485 support.
Parts:
- External connecting cables:
- 8 pin flying leads cable for analog video, lead length = 15cm / 5.9 inch
- 6 pin flying leads cable for RS485, lead length = 15cm / 5.9inch
- Camera connection cables:
- 24pin flat flex cable, contacts on same side, pitch = 0.5mm, length = 10cm / 3.9inch
Optional Parts Evaluation Kit
12 V AC to DC external power supply (PS-TE10A12)
- 12 V AC to DC external power supply designed for test & measurement and industrial applications. The Power Supply has a interchangeable blade kit for USA, Europe, United Kingdom and Australian.
USB 2.0 Cable (TL-EVK-USB2-A-MICROB)
- USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector
Bracket and screws (TL-EVK-BRA)
- Bracket and screws to connect the board with the camera.
MCX to BNC connector cable (CK-MCX-BNC)
- MCX to BNC connector cable for the HD-SDI connection.
HDMI Cable (TL-EVK-HDMI)
- High Speed HDMI Cable. HDMI-A male > HDMI-A male 4K 2 meter Slim Premium
USB to serial adapter cable (TL-EVK-USB-SA)
- This USB to serial adapter enables you to connect a serial device to a free USB port. Connector: 1 x USB 1.1 type A male > 1 x serial RS-232 DB9 male
TL7052 AIVION Camera Evaluation Kit
Partnumber: TL7052-EVK-AZM-FSXXL
The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.
Parts:
- AIVION Block Camera AZM-FS10L, AZM-FS20L, AZM-FS30L or AZM-WQHS36L-LL
- HDMI Board (TL7752)
- Base cable kit (TLCK-B):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- Power supply and control interface board (EK-PA1100)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector (TL-EVK-USB2-A-MICROB)
- Bracket and screws (TL-EVK-BRA)
- High Speed HDMI Cable. HDMI-A male > HDMI-A male 4K 2 meter (TL-EVK-HDMI)
- AIVION Visca Camera Control Software