Camera Interfaces

TL 7075 optical fiber (Transmitter), optical single link for Sony FCB

Camera interface with optical 3G video transmitter for Sony Block Cameras

The TL7075 interface from AIVION together with the TL7076 (receiver) allows the transmission of video streams and camera control via one fiber line. The transmission chain supports Sony FCB-EH, EV and the FCB- SE600 type of cameras. This solution is unique in the market. For OEMs, in the broadcast and RUV market having the need to transfer real time streams over long distance the solution is most valuable.

TL7075 Features

  • Digital LVDS video input from camera
  • Optical 3G/HD-SDI output compliant to SMPTE297M-2006
  • SFP transceiver λTX=1310nm, SMF/LC included
  • Local BNC coax, MCX coax and DVI (HDMI connector) 3G/HD-SDI outputs

Supported Video Standards

The following HDTV video standards are supported by the TL7075/TL7076 transmission solution. Note that video standard availability is always dependent on the capability of the camera block used.

  • 1080p output at 60Hz, 59.94Hz, 50Hz, 30Hz, 29.97Hz and 25Hz
  • 720p output at 60Hz, 59.94Hz, 50Hz, 30Hz, 29.97Hz and 25Hz
  • 1080i output at 60Hz, 59.94Hz and 50Hz

TL7075/TL7076 System Diagram

TL7075 Blockdiagram
TL7075/TL7076 System Diagram

Blockdiagram TL7075

TL7075 Blockdiagram
Blockdiagramm TL7075

The TL7075/TL7076 transmission solution supports following Sony FCB Cameras (Series EV, EH, SE)

Sony FCBEV-7100
Sony FCB
Model Video output Camera control interface Image Device Effective Pixels Horizontal Viewing Angle Lens Value
FCB‑EH3150 HD: Analog: Component (Y/Pb/Pr) HD: Digital: Y/Cb/Cr 4:2:2 via LVDS SD: VBS VISCA protocol (TTL signal level) 1/4-type Exmor CMOS Sensor Approximately 1.43m 53.4° (wide end) to 4.6° (tele end) 12x Optical Zoom, f=3.7 mm (wide) to 44.4 mm (tele), F1.6 to F2.5
FCB‑EH3300 HD: Analog: Component (Y/Pb/Pr), Digital: (Y/CB/Cr) 4:2:2 via LDS SD: VBS VISCA protocol (TTL signal level) 1/4-type Exmor CMOS Sensor Approximately 1.45m 55.9° (wide end) to 2.9° (tele end) 20x Optical zoom, f=3.5 mm (wide) to 70.0 mm (tele), F1.35 to F3.4
FCB‑EH3310 HD: Analog: Component (Y/Pb/Pr), Digital: Y/CB/Cr 4:2:2 via LVDS SD: VBS VISCA protocol (TTL signal level) 1/4-type Exmor CMOS Sensor Approximately 1.43m 55.9° (wide end) to 2.9° (tele end) 20x optical zoom, f=3.5 mm (wide) to 70.0 mm (tele), F1.35 to F3.4
FCB‑EH3400 HD: Analog: Component (Y/Pb/Pr), Digital: (Y/CB/Cr) 4:2:2 via LDS SD: VBS VISCA protocol (TTL signal level) 1/4-type Exmor CMOS Sensor Approximately 1.45m 55.9° (wide end) to 2.1° (tele end) 28x Optical zoom, f=3.5 mm (wide) to 98.0 mm (tele), F1.35 to F3.7
FCB‑EH3410 HD: Analog: Component (Y/Pb/Pr), Digital: (Y/CB/Cr) 4:2:2 via LDS SD: VBS VISCA protocol 1/4-type Exmor CMOS Sensor Approximately 1.45m 55.9° (wide end) to 2.1° (tele end) 8x Optical zoom, f=3.5 mm (wide) to 98.0 mm (tele), F1.35 to F3.7
FCB‑EH6300 Digital: Y/Cb/Cr 4:2:2 via LVDS VISCA (TTL Signal Level) Baud Rate: 96 Kb/s, 19.2 Kb/s, 38.4 Kb/s Stop bit: 1/2 bit selectable 1/2.8 type Exmor CMOS sensor Approx. 2 million 54.1° (wide end) to 2.9° (tele end) 20x Optical Zoom, f=4.7 mm (wide) ~ 94.0 mm (tele), F1.6 to F3.5
FCB‑EH6500 Digital: Y/Cb/Cr 4:2:2 via LVDS VISCA (TTL Signal Level) Baud Rate: 96 Kb/s, 19.2 Kb/s, 38.4 Kb/s Stop bit: 1/2 bit selectable 1/2.8 type Exmor CMOS sensor Approx. 3.27 million 54.1° (wide end) to 2.9° (tele end) 30x Optical Zoom, f=4.3 mm (wide) ~ 129.0 mm (tele), F1.6 to F4.7
FCB‑EV5300 Digital: Y/Cb/Cr 4:2:2 via LVDS (Signal format conforms to SMPTE 296.) VISCA (CMOS 5 V level) Baud rate: 9.6 Kbps, 19.2 Kbps, 38.4 Kbps, 115.2 Kbps, Stop bit: 1 bit 1/3.0 type Exmor CMOS Approx. 1.37 Mega Pixels 54.1°(wide end) to 2.9°(tele end) 20x optical zoom; f = 4.7 mm (wide) to 94.0 mm (tele); F1.6 to F3.5
FCB‑EV5500 Analog: Component (Y/Pb/Pr); Digital: Y/Cb/Cr 4:2:2 via LVDS; (Signal format conforms to SMPTE 296.) VISCA (CMOS 5 V level); Baud rate: 9.6 Kbps, 19.2 Kbps, 38.4 Kbps, 115.2 Kbps, Stop bit: 1 bit 1/3.0 type Exmor CMOS Approx. 1.37 Megapixels 58.3°(wide end) to 2.1°(tele end) 30x optical zoom; f=4.3mm (wide) to 129.0mm (tele); F1.6 to F4.7
FCB‑EV7100 Analog: Component (Y/Pb/Pr); Digital: Y/Cb/Cr 4:2:2 via LVDS;(Signal format conforms to SMPTE 274/SMPTE 296.) VISCA protocol (CMOS 5V level); Baud rate: 9.6 Kbps, 19.2 Kbps, 38.4 Kbps, 115.2 Kbps, Stop bit: 1 bit 1/2.8 type Exmor CMOS Approx. 2.38 Mega Pixels 67.0°(wide end) to 7.6°(tele end) 10x optical zoom; f=3.8mm (wide) to 38mm (tele); F1.8 to F3.4
FCB‑EV7300 HD: Analog: Component (Y/Pb/Pr); Digital: Y/Cb/Cr 4:2:2 via LVDS (Signal format conforms to SMPTE 274/SMPTE 296.)SD: VBS VISCA protocol 1/2.8 type Exmor CMOS Approx. 2.38 Mega Pixels 59.5°(wide end) to 3.3°(tele end) NA
FCB‑EV7310 HD: Digital: Y/Cb/Cr 4:2:2 via LVDS (Signal format conforms to SMPTE 274/SMPTE 296.)SD: VBS VISCA (CMOS 5 V level); Baud rate: 9.6 Kbps, 19.2 Kbps, 38.4 Kbps, 115.2 Kbps, Stop bit: 1 bit 1/2.8 type Exmor CMOS Approx. 2.38 Mega Pixels 59.5°(wide end) to 3.3°(tele end); SD 44.6°(wide end) to2.5°(tele end) 20x optical zoom; = 4.7 mm (wide) to 94.0 mm (tele); F1.6 to F3.5
FCB‑EV7500 HD: Digital: Y/Cb/Cr 4:2:2 via LVDS (Signal format conforms to SMPTE 274/SMPTE 296.)SD: VBS VISCA (CMOS 5 V level); Baud rate: 9.6 Kbps, 19.2 Kbps, 38.4 Kbps, 115.2 Kbps, Stop bit: 1 bit 1/2.8 type Exmor CMOS Approx. 2.38 Mega Pixels 59.5°(wide end) to 3.3°(tele end); SD 44.6°(wide end) to2.5°(tele end) 30x optical zoom; f=4.3mm (wide) to 129.0mm (tele); F1.6 to F4.7
FCB‑SE600 Digital Y/Pb/Pr 4:2:2, LVDS VISCA (CMOS 5 V level) Baud rate: 9.6 Kbps, 19.2 Kbps, 38.4 Kbps Stop bit: 1 bit 1/2.8-type Exmor CMOS Approx. 3.27 Megapixels H, 1080p mode: 90° (wide) to 32° (tele) H, 720p mode: 60° (wide) to 21° (tele) 3x

TL7075/TL7076 Production Bundle

Partnumber: TL7075-TL7076

Production kit with all items needed for production. Powerful, cheap , competitive

Parts:

  • TL7075 Board
  • TL7076 Board
  • Base cable kit (TLCK-B) for TL7075:
    • 10 pin flying leads cable for power and control, length 15cm
    • 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
  • Cable kit for TL7076 (TLCK-B7076):
  • 10pin flying leads cable for power and control, lead length = 15cm / 5.9inch

Base Cable Kit

Partnumber: TLCK-B

Cable kit for the TL7075 interface board

Parts:

  • 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
  • 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm

Cable Kit TLCK-B7076

Partnumber: TLCK-B7076

Cable kit for the TL7076 interface board

Parts:

  • External connecting cable: 10pin flying leads cable for power and control, lead length(15cm/5.9inch)