Camera Interfaces

TL 7751 | HD Serial Digital Interface for AIVION Block Cameras

HD-Serial Digital Interface for the AIVION AZM-FSLXXL SERIES

The TL7751 Dual 3G/HD-SDI Output Video Transceiver module from AIVION connect to the digital video interface of AIVION`S block cameras and support several progressive and interlace HDTV formats. As no analog to digital conversion is done on these modules, excellent output image quality is achieved.

Features

  • Digital 4channel LVDS video input from camera
  • Full automatic video input standard detection
  • Dual HD-SDI outputs (TL7550 and TL7551 only)
  • SDI outputs compliant to SMPTE424M / SMPTE292M
  • Native digital signal processing chain for best image quality
  • RS232 and TTL level serial control interface
  • Robust RS485 differential serial control interface
  • Supply voltage 5V or 12V DC regulated
  • Board temperature monitoring with alert function

Supported Video Standards

The following HDTV video standards are supported by the TL7751. Note that video standard availability is always dependent on the capability of the camera block used.

  • 1080p output at 60Hz, 59.94Hz, 50Hz, 30Hz, 29.97Hz and 25Hz
  • 720p output at 60Hz, 59.94Hz and 50Hz
  • 1080i output at 60Hz, 59.94Hz, 50Hz, 30Hz, 29.97Hz and 25Hz

Blockdiagram TL7751

TL7550 Blockdiagram
Blockdiagramm TL7751

AZM Productline

AZM FSL30
Specifications AZM-FS10L AZM-FS20L AZM-FS30L AZM-FS36L
Sensor Image Sensor 1/3” Progressive CMOS
(Approx. 2.1 mega)
1/3” Progressive CMOS
(Approx. 2.1 mega)
1/3” Progressive CMOS
(Approx. 2.1 mega)
1/1.9”Progressive CMOS
(Approx. 2.3 mega)
Scanning System 16:9 Progressive
Sync. System Internal
Effective Pixel 1920(H) x 1080(V) 1920(H) x 1080(V) 1944(H) x 1092(V) 1920(H) x 1080(V)
Min. Illumination 0.2Lux (Day),
0.1Lux (Night),
0.005Lux(DSS on)
0.2Lux (Day),
0.1Lux (Night),
0.005Lux(DSS on)
Color(1/30s) : 0.5 lux ,
BW(1/30s) : 0.1lux Color DSS(1/7.5s) : 0.125 lux ,
BW DSS(1/7.5s) : 0.025 lux
0.1Lux (Day),
0.05Lux (Night),
0.002Lux(DSS on)
Optics Lens 10x optical Zoom,
f=4.7~47mm, F1.6 ~ F3.0
20x optical Zoom,
F=4.7~94mm, F1.6 ~ F3.5
30x optical Zoom,
F=4.3~129mm, F1.6 ~ F4.7
36x optical Zoom,
F=6~216mm, F1.5 ~ F4.8
Zoom 10x optical zoom + 12x digital zoom = 120x 20x optical zoom + 12x digital zoom = 240x 30x optical zoom + 32x digital zoom = 960x 36x optical zoom + 12x digital zoom = 432x
Focus Near/Far, Auto/Manual/One Push
Angle of View(H) 57.7 degrees(WIDE),
6.4 degrees(TELE)
57.4 degrees(WIDE),
3.2 degrees(TELE)
58.9 degrees(WIDE),
2.11 degrees(TELE)
60 degrees(WIDE),
2.0 degrees(TELE)
Functions Back Light Compensation WDR/BLC,
HLC(High Light compensation)
WDR/BLC,
HLC(High Light compensation)
WDR/BLC WDR/BLC,
HLC(High Light compensation)
Exposure Auto / Manual
White Balance Auto(3,000°K~8,000°K) / ATW(1,900°K~11,000°K) / Manual Auto(3,000°K~8,000°K) / ATW(1,900°K~11,000°K) / Manual Auto / One Push / Manual / Indoor / Outdoor Auto(3,000°K~8,000°K) / ATW(1,900°K~11,000°K) / Manual
Day & Night System AGC / TDN(ICR) AGC / TDN(ICR) Auto / Day / Night / Ext-in AGC / TDN(ICR)
Electronic Shutter NTSC: 1/30~1/30000, PAL: 1/25~1/30000,
DSS( ~ 1/1sec)
NTSC: 1/30~1/30000, PAL: 1/25~1/30000,
DSS( ~ 1/1sec)
NTSC: 1/30~1/30000, PAL: 1/25~1/30000,
DSS Off/x2/x4 (/x8:60 or 50fps mode only)
NTSC: 1/30~1/30000, PAL: 1/25~1/30000,
DSS( ~ 1/1sec)
Functions Privacy Mask, Image Mirror, 3DNR, Flicker-less, Sharpness, Defog, DIS(Digital Image stabilizer), NegArt, Freeze, B&W Privacy Mask, Image Mirror, 3DNR, Flicker-less, Sharpness, Defog, DIS(Digital Image stabilizer), NegArt, Freeze, B&W HLC / DNR / Mirror / Sharpness / ACE / Defog / Freeze / Gamma Privacy Mask, Image Mirror, 3DNR, Flicker-less, Sharpness, Defog, DIS(Digital Image stabilizer), NegArt, Freeze, B&W
Video Outputs Digital Output(LVDS) 1920x1080p@25,30,50,60 1920x1080i@50,60
1280x720p@25,30,50,60
ITU-R BT.1120 YcbCr4:2:2 16bits, 20bits(single LVDS mode)
1920x1080p@25,30,50,60 1920x1080i@50,60
1280x720p@25,30,50,60
ITU-R BT.1120 YcbCr4:2:2 16bits, 20bits(single LVDS mode)
1920x1080p@25,30,50,60 1920x1080i@50,60
1280x720p@25,30,50,60
1920x1080p@25,30,50,60 1920x1080i@50,60
1280x720p@25,30,50,60
ITU-R BT.1120 YcbCr4:2:2 16bits, 20bits(single LVDS mode)
CVBS (NTSC/ PAL) Analog Composite (1V ± 0.2 Vp-p) NTSC/PAL Analog Composite (1V ± 0.2 Vp-p) NTSC/PAL Analog Composite (1V ± 0.2 Vp-p) NTSC/PAL
Control Interface UART (5V level) SONY-VISCA protocol
8bits data, 1 stop bit, no parity, 2400~115200bps
General Operation Temperature -20°C ~ 60°C -20°C ~ 60°C -10°C ~ 50°C -20°C ~ 60°C
Power Input 12VDC (7V to 15VDC) 12VDC (7V to 15VDC) 9V to 15V DC 12VDC (7V to 15VDC)
Power consumption Max 4W (2.5W Lens inactive, 3.2W Lens active) Max 5W (3.2W Lens inactive, 3.9W Lens active) 500mA Max 5W (3.2W Lens inactive, 3.9W Lens active)
Mass Approx. 140g (5.0 oz.) Approx. 240g (8.5 oz.) Approx. 240g (8.5 oz.) Approx. 265g (9.35 oz.)
Dimensions 67(D) x 43.6(W) X 45.3(H) mm 87(D) x 50(W) X 60(H) mm 93(D) x 50(W) X 60(H) mm 119.35(D) x 51.8(W) x 54.05(H) mm

TL7751 Camera Evaluation Kit

Partnumber: TL7751-EVK-AZM-FSXXL

The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.

Parts:

  • AZM-FS10L, AZM-FS20L, AZM-FS30L or AZM-FS36L
  • Dual HD-SDI Board (TL7751)
  • Base cable kit (TLCK-B):
    • 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
    • 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
  • Power supply and control interface board (EK-PA1100)
  • 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
  • USB to serial adapter (TL-EVK-USB-SA)
  • Bracket and screws (TL-EVK-BRA)
  • MCX to BNC connector cable (CK-MCX-BNC)
  • AIVION Visca Camera Control Software

Optional Parts Evaluation Kit

Partnumber: PS-TE10A12

12 V AC to DC external power supply designed for test & measurement and industrial applications. The Power Supply has a interchangeable blade kit for USA, Europe, United Kingdom and Australian.

Partnumber: TL-EVK-USB-SA

This USB to serial adapter enables you to connect a serial device to a free USB port. Connector: 1 x USB 1.1 type A male > 1 x serial RS-232 DB9 male

TL7751 Evaluation Kit

Partnumber: TL7751-EVK

The evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.

Parts:

  • Dual HD-SDI Board (TL7751)
  • Base cable kit (TLCK-B):
    • 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
    • 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
  • Power supply and control interface board (EK-PA1100)
  • 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
  • USB to serial adapter (TL-EVK-USB-SA)
  • Bracket and screws (TL-EVK-BRA)
  • MCX to BNC connector cable (CK-MCX-BNC)
  • AIVION Visca Camera Control Software

Optional Parts Evaluation Kit

Partnumber: PS-TE10A12

12 V AC to DC external power supply designed for test & measurement and industrial applications. The Power Supply has a interchangeable blade kit for USA, Europe, United Kingdom and Australian.

Partnumber: TL-EVK-USB-SA

This USB to serial adapter enables you to connect a serial device to a free USB port. Connector: 1 x USB 1.1 type A male > 1 x serial RS-232 DB9 male

TL7751 Production Kit

Partnumber: TL7751

Production kit with all items needed for production. Powerful, cheap , competitive

Parts:

  • TL7751 Board
  • Base cable kit (TLCK-B):
    • 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
    • 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm

Base Cable Kit

Partnumber: TLCK-B

Cable kit for the TL7751 interface board

Parts:

  • 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
  • 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm