Camera Interfaces
TL3K7052 WQHD HDMI(DVI) Interface
High Definition Multimedia Interface for Block Cameras
The TL3K7052 is a HDMI Output Video Transceiver module from AIVION. It connects to the digital video interface of the block cameras and support several progressive and interlace HDTV formats. As no analog to digital conversion is done on these modules, excellent output image quality is achieved.
Features
- Digital 4Ch./8Ch. LVDS video input from camera
- Full automatic video input standard detection
- WQHD/FHD/HD DVI video output over HDMI connector
- Native digital signal processing chain for best image quality
- RS232 and TTL level serial control interface
- Supply voltage 12V DC regulated
- Temperature monitoring with alert function
Supported Video Standards
The following HDTV video standards are supported by the TL7052. Note that video standard availability is always dependent on the capability of the camera block used.
- 1440p output at 30Hz and 25Hz
- 1080p output at 30Hz and 25Hz
- 750p output at 30Hz and 25Hz
Blockdiagram TL7052
The TL3K7052 HDMI Interface supports following 3K Camera:
- AIVION Block Camera AZM-WQHS36L-LL
AIVION Cameras
| Name | AZM-WQHS36L-LL |
| Datasheet | AZM-WQHS36L-LL |
| Video Output Digital | LVDS |
| Video Output Analog | HD-Analog / CVBS(※ Test Only) |
| Camera Control Interface | Visca Protocol |
| Effectiv numbers of Pixels | Approx. 5,450,000 pixels |
| Image sensor | 1/1.8" Sony IMX178LQJ-C CMOS Sensor (Progressive Scan) |
| Signal system (HD) | 1440p 30(25)fps, 1080p 30(25)fps, 720p 30(25)fps |
| Lens | Optical x36, f = 6.0 mm to 216 mm (F1.5 to F4.8) |
| Horizontal viewing angle (wide to tele) | 49.27 degrees(WIDE) to 1.85 degrees(TELE) |
| Digital Zoom | 32x |
TL3K7052 Evaluation Kit
Partnumber: TL3K7052-EVK
The evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.
Parts:
- HDMI Board (TL3K7052)
- Base cable kit (TLCK-B):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- Power supply and control interface board (EK-PA1100)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector (TL-EVK-USB2-A-MICROB)
- Bracket and screws (TL-EVK-BRA)
- High Speed HDMI Cable. HDMI-A male > HDMI-A male 4K 2 meter (TL-EVK-HDMI)
- AIVION Visca Camera Control Software
TL3K7052 Production Kit
Partnumber: TL3K7052
Production kit with all items needed for production. Powerful, cheap , competitive
Parts:
- TL3K7052 HDMI Board
- TLCK-B | Base cable kit:
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
Base Cable Kit
Partnumber: TLCK-B
Cable kit for the TL3K7052 interface board
Parts:
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
Optional Parts Evaluation Kit
12 V AC to DC external power supply (PS-TE10A12)
- 12 V AC to DC external power supply designed for test & measurement and industrial applications. The Power Supply has a interchangeable blade kit for USA, Europe, United Kingdom and Australian.
USB 2.0 Cable (TL-EVK-USB2-A-MICROB)
- USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector
Bracket and screws (TL-EVK-BRA)
- Bracket and screws to connect the board with the camera.
MCX to BNC connector cable (CK-MCX-BNC)
- MCX to BNC connector cable for the HD-SDI connection.
HDMI Cable (TL-EVK-HDMI)
- High Speed HDMI Cable. HDMI-A male > HDMI-A male 4K 2 meter Slim Premium
USB to serial adapter cable (TL-EVK-USB-SA)
- This USB to serial adapter enables you to connect a serial device to a free USB port. Connector: 1 x USB 1.1 type A male > 1 x serial RS-232 DB9 male
TL3K7052 AIVION Camera Evaluation Kit
Partnumber: TL3K7052-EVK-AZM-WQHS36L-LL
The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.
Parts:
- AIVION Block Camera AZM-WQHS36L-LL
- HDMI Board (TL3K7052)
- Base cable kit (TLCK-B):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- Power supply and control interface board (EK-PA1100)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector (TL-EVK-USB2-A-MICROB)
- Bracket and screws (TL-EVK-BRA)
- High Speed HDMI Cable. HDMI-A male > HDMI-A male 4K 2 meter (TL-EVK-HDMI)
- AIVION Visca Camera Control Software
