Camera Interfaces

TL4K1161 Dual Link 3G SDI transmitter for sony fcb er8300

Dual Link 3G-SDI Transmitter Interface for Sony FCB ER-8300

The TL4K1161 is a small form factor serial digital video (SDI) transmitter from AIVION. Camera video input signals are equalized, processed and output over straight DIN7A(10.23) connectors. Dual Link 3G-SDI output compliant to SMPTE ST425-3, 2si mapping, FHD output compliant o SMPTE ST425-1 level A Camera control is accomplished by a transparent full duplex communication channel. Physical interface between camera and camera controller / PC is based on RS232 or 3.3V TTL level. TLCK-B cable kit is included and contains 30wire micro coaxial cable for connecting TL4K1161 to FCB-ER8300 as well as 10wire power supply and serial control cable harness.

Features

  • Video output up to Ultra High Defnition
  • Seamless connection to Sony FCB-ER8300 4K camera block
  • Dual Link 3G-SDI output of UHD formats
  • 3G-SDI output of FHD formats
  • 1.5G-SDI output of HD formats
  • Automatic format detection
  • DIN7A (10.23) 75 Ohm straight coaxial connectors
  • RS232 and TTL level serial camera control interface
  • Supply voltage 9V to 12V DC regulated
  • RoHS and UL/UR compliant

Quick Specification

  • FCB-ER8300 interface on 30pin microcoax connector
  • Up to 4K 3840x2160@30fps SDI video output
  • Supply voltage 7V to 12V DC, 8V DC recommended
  • Operating ambient temperature range -5°C to +60°C
  • Operating humidity range 20% to 80%
  • Power consumption 3.62W with 12V DC supply voltage
  • Power consumption 6.72W with 12V DC supply voltage incl. FCB-ER8300 camera block
  • Board size (L x W) 46mm x 60mm
  • Wire/cable kit for camera and external interconnect
  • RoHS compliant (2002/05/EG and 2011/65/EU)
  • UL/UR compliant

Blockdiagram TL4K1161

TL4K1161 Blockdiagram
Blockdiagramm TL4K1161

The TL4K1161 Dual Link 3G-SDI interface supports the Sony FCB-ER8300 Camera

Sony FCBEr-8300
Sony FCBER8300
Model Video output Camera control interface Image Device Effective Pixels Horizontal Viewing Angle Lens Value
FCB‑ER8300 Minimum Illumination Color: 0.75 lx (F1.8, AGC on, 1/30 s) High Sensitivity Mode Color: 3 lx (F1.8, AGC on, 1/30 s) Normal Mode VISCA (CMOS 3.1 V level) Baud rate: 9.6 Kbps, 19.2 Kbps, 38.4 Kbps, 57.6 Kbps, 115.2 Kbps, Stop bit: 1 bit Progressive scan CMOS Image Sensor 1/2.3 type "Exmor R" Approx. 8.93 Mega Pixels 73.4° (wide end) to 6.4° (tele end) 12x optical zoom, f = 3.9 mm (wide) to 46.8 mm (tele), F1.8 to F2.0

TL4K1161 Sony FCB ER-8300 DUAL LINK 3G-SDI Camera Evaluation Kit

Partnumber: TL4K1161-EVK-FCB-ER8300

The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours. You need for a complete test environment a USB to serial adapter (PS-TE10A12) and a 12 V Power Supply (PS-TE10A12).

Parts:

  • Sony FCB ER-8300
  • DUAL LINK 3G-SDI Board (TL4K1161)
  • Power supply and control interface board (EK-PA1100)
  • Bracket and screws (TL-EVK-BRA)
  • 2 Connector cables with a 75Ω BNC Straight Plug and a 75Ω DIN Straight Plug. Certified for 3Gbps. Length 1 meter (TL-EVK-DIN-BNC-1)
  • Base cable kit (TLCK-B):
    • 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
    • 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm

Optional Parts Evaluation Kit

Partnumber: PS-TE10A12

12 V AC to DC external power supply designed for test & measurement and industrial applications. The Power Supply has a interchangeable blade kit for USA, Europe, United Kingdom and Australian.

Partnumber: TL-EVK-USB-SA

This USB to serial adapter enables you to connect a serial device to a free USB port. Connector: 1 x USB 1.1 type A male > 1 x serial RS-232 DB9 male

TL4K1161 Evaluation Kit

Partnumber: TL4K1161-EVK

The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours. You need for a complete test environment a USB to serial adapter (PS-TE10A12) and a 12 V Power Supply (PS-TE10A12).

Parts:

  • DUAL LINK 3G-SDI Board (TL4K1161)
  • Power supply and control interface board (EK-PA1100)
  • Bracket and screws (TL-EVK-BRA)
  • 2 Connector cables with a 75Ω BNC Straight Plug and a 75Ω DIN Straight Plug. Certified for 3Gbps. Length 1 meter (TL-EVK-DIN-BNC-1)
  • Base cable kit (TLCK-B):
    • 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
    • 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm

Optional Parts Evaluation Kit

Partnumber: PS-TE10A12

12 V AC to DC external power supply designed for test & measurement and industrial applications. The Power Supply has a interchangeable blade kit for USA, Europe, United Kingdom and Australian.

Partnumber: TL-EVK-USB-SA

This USB to serial adapter enables you to connect a serial device to a free USB port. Connector: 1 x USB 1.1 type A male > 1 x serial RS-232 DB9 male

TL4K1161 Production Kit

Partnumber: TL4K1161

Production kit with all items needed for production. Powerful, cheap , competitive. Additional Connector Options(MOQ) are available.

Parts:

  • TL4K1161 Board with DIN7A (10.23) 75 Ohm straight coaxial connector
  • Base cable kit (TLCK-B):
    • 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
    • 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm

Base Cable Kit

Partnumber: TLCK-B

Cable kit for the TL4K1161 interface board

Parts:

  • 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
  • 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm