Camera Interfaces

TL6535 | USB 3.0 interface board for Koeisha block camera

USB 3.0 interface for Koeisha KSM203

The TL6535 USB 3.0 interface board from AIVION connects to the digital video interface of Koeisha’s KSM203 block camera and supports several progressive HDTV formats.

Features

  • Provides a small size, easy to use HDTV USB 3.0 compliant video streaming capture solution
  • Up to 1080p30 uncompressed HDTV video data, 4:2:2 YUV format
  • The module receives digital video signals at the input and sends UVC (USB Video Class) compliant data packets containing digital video payload to a connected host computer
  • Operates always as Super Speed USB3.0 device (Host or OTG operation modes are not supported)
  • Host computer must run a UVC capable operating system
  • Parallel up- and downstream of camera control and status data is possible (USB CDC)
  • The input supports multiplexed LVDS based video data
  • LVDS data format provided by KSM201 and KSM203 camera blocks
  • Full USB bus powered camera solution possible depending on camera
  • Power supply voltage for camera is generated onboard

Supported Video Standards

The following HDTV video standards are supported by the TL6535. Note that video standard availability is always dependent on the capability of the camera block used. As interlace video modes are not supported, make sure to set camera to any supported progressive video mode to enable correct video image data transmision to any host PC.

  • 1920x1080p @ 25Hz, 29.97Hz, 30 Hz
  • 1280x720p @ 50Hz, 59.94Hz, 60Hz, 25Hz, 29.97Hz, 30Hz

Blockdiagram TL6535

TL6535 Blockdiagram
Blockdiagramm TL6535

The TL6535 USB Interface supports KOEISHA KSM203

KSM203
KOEISHA KSM203
Model Video output Camera control interface Image Device Lens Angular Field of View (1080)
KSM203 Digital: Y/ Cb/ Cr 4:2:2 (LVDS) VISCA protocol Sony 1/2.8 type Exmor CMOS sensor 20xOptical f=4.7mm~94.0mm F1.6~F3.5 55.4°(Wide)~2.9°(Tele)

TL6535 Camera Evaluation Kit

Partnumber: TL6535-EVK-KSM203

The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.

Parts:

  • KOEISHA KSM203 Camera
  • USB 3.0 Board (TL6535)
  • 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm (TLCK-K30-200)
  • Power supply and control interface board (EK-PA1100-USB)
  • 5 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A05)
  • USB to serial adapter (TL-EVK-USB-SA)
  • Bracket and screws (TL-EVK-BRA)
  • USB 3.0 Cable with a USB 3.0-A male and a USB 3.0 micro-B male connector
    (TL-EVK-USB3.0-A-microB)
  • AIVION Visca Camera Control Software

TL6535 Evaluation Kit

Partnumber: TL6535-EVK

The evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.

Parts:

  • USB 3.0 Board (TL6535)
  • 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm (TLCK-K30-200)
  • Power supply and control interface board (EK-PA1100-USB)
  • 5 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A05)
  • USB to serial adapter (TL-EVK-USB-SA)
  • Bracket and screws (TL-EVK-BRA)
  • USB 3.0 Cable with a USB 3.0-A male and a USB 3.0 micro-B male connector
    (TL-EVK-USB3.0-A-microB)
  • AIVION Visca Camera Control Software

TL6535 Production Kit

Partnumber: TL6535

Production kit with all items needed for production. Powerful, cheap , competitive

Parts:

  • USB 3.0 Board (TL6535)
  • 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm (TLCK-K30-200)

Cable Kit

Partnumber: TLCK-K30-200

Cable kit for the TL6535 interface board

Parts:

  • 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm