Camera Interfaces
TL7055 3G-SDI and analog YPbPr Interface
High Definition Serial Digital and analog HD Interfaces for Block Cameras
The TL7055 is a small form factor full HD 3G-SDI plus analog YPbPr output video transmitter AIVION. Camera LVDS video input signals are demultiplexed, processed and encoded. 3G/HD-SDI Video is output over a MCX connector. Analog YsPbPr Video is output over a 8pin board to wire connector. Camera control is accomplished by a transparent full duplex communication channel. Physical layer between camera and camera controller is based on a RS232 level interface.
Features
- Native video output up to 1920x1080p @ 60fps
- Seamless connection to zoom camera blocks with industry standard LVDS interface
- SMPTE compliant tri level sync on Y
- RS232 level serial camera control interface
- VISCA controlled Embedded Test Pattern Generator + Supply voltage 9V to12V DC regulated
- RoHS and UL/UR compliant
- TLCK-B6 Cable Kit include
Supported Video Standards
The following video standards are supported by the TL7055. Note that video standard availability is always dependent on the capability of the camera block used.
3G-SDI/HD-SDI Output:
- 1080p60 /59.94 /50 /30 /29.97 /25 Hz
- 1080i60 /59.94 /50 Hz
- 720p60 /59.94 /50 /30 /29.97 /25Hz
Analog YsPbPr Output:
- 1080p60 /59.94 /50 /30 /29.97 /25 Hz
- 720p60 /59.94 /50 Hz
Blockdiagram TL7055
TL7055 MP1110M-VC Tamron Camera Evaluation Kit
Partnumber: TL7055-EVK-MP1110M-VC
The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.
Parts:
- Tamron MP1110M-VC Camera
- 3G-SDI & analog Board (TL7055)
- Base cable kit (TLCK-B6):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- 8 pin flying leads cable for the analog YsPbPr video output
- Power supply and control interface board (EK-PA1100)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- USB to serial adapter (TL-EVK-USB-SA)
- MCX to BNC connector cable (CK-MCX-BNC)
TL7055 MP3010M-EV Tamron Camera Evaluation Kit
Partnumber: TL7055-EVK-MP3010M-EV
The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.
Parts:
- Tamron MP3010M-EVC Camera
- 3G-SDI & analog Board (TL7055)
- Base cable kit (TLCK-B6):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- 8 pin flying leads cable for the analog YsPbPr video output
- Power supply and control interface board (EK-PA1100)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- USB to serial adapter (TL-EVK-USB-SA)
- MCX to BNC connector cable (CK-MCX-BNC)
The TL7055 FHD LVDS to 3G-SDI plus analog YPbPr Transmitter supports following HD Cameras:
- Sony FCB-EV7520A and the legacy Sony HD Block Cameras
- Tamron Block Cameras
- AIVION AZM Block Cameras
- Every other module camera with LVDS Output
Sony FCB-EV7520
| Name | FCB-EV7520A |
| Datasheet | FCB-EV7520A |
| Video Output Digital | Digital : Y / Pb / Pr 4:2:2 (LVDS) (Y: 8 bit, C: 8 bit, Vsync, Hsync, Field, Clock) (SMPTE274M/SMPTE296M) |
| Video Output Analog | (CVBS) PAL / NTSC |
| Camera Control Interface | VISCA protocol (CMOS 5V Level) ; Baud Rate : 9.6 kbps, 19.2 kbps, 38.4 kbps, 115.2 kbps, Stop bit : 1 bit |
| Effectiv numbers of Pixels | Approx. 2.130.000 pixels |
| Image sensor | 1/2,8- type Exmor R CMOS |
| Signal System(HD) | 1080p/60, 1080p/59.94, 1080p/50, 1080p/30, 1080p/29.97, 1080p/25, 1080i/60, 1080i/59.94, 1080i/50, 720p/60, 720p/59.94, 720p/50, 720p/30, 720p/29.97, 720p/25 |
| Lens | 30x optical zoom ; f= 4.3 mm to 129 mm, F1.6 to F4.7 |
| Horizontal viewing angle (wide to tele) | 63.7° to 2.3° |
| Digital Zoom | 12x |
Tamron Module Cameras
| Name | MP1110M-VC |
| Datasheet | MP1110M-VC |
| Video Output Digital | LVDS (Y/Pb/Pr 4:2:2) |
| Video Output Analog | CVBS |
| Camera Control Interface | Visca Protocol |
| Effectiv numbers of Pixels | Approx. 4,080,000 pixels |
| Image sensor | 1/3-type CMOS (Progressive Scan) |
| Signal system (HD) | 1080p/60, 1080p/59.94, 1080p/50, 1080p/30, 1080p/29.97, 1080p/25, 1080i/60, 1080i/59.94, 1080i/50, 720p/60, 720p/59.94, 720p/50, 720p/30, 720p/29.97, 720p/25 |
| Lens | 10x optical zoom f=3.3 mm (wide) to 33.0 mm (tele) F1.8 to F3.4 |
| Horizontal viewing angle (wide to tele) | 58.2 degrees to 6.9 degrees |
| Digital Zoom | 16x |
AIVION Cameras
| Name | AZM-FS10L | AZM-FS20L | AZM-FS30L2 | AZM-WQHS36L-LL |
| Datasheet | AZM-FS10L | AZM-FS20L | AZM-FS30L2 | AZM-WQHS36L-LL |
| Video Output Digital | LVDS Digital ITU-R BT.1120 - YcbCr4:2:2 16bits | LVDS Digital ITU-R BT.1120 - YcbCr4:2:2 16bits, 20bits (single LVDS mode) | LVDS Digital ITU-R BT.1120 - YcbCr4:2:2 16bits, 16bits | LVDS |
| Video Output Analog | SD CVBS (NTSC/PAL), 1.0Vp-p 75, Composite | SD CVBS (NTSC/PAL), 1.0Vp-p 75, Composite | HD-Analog / CVBS(※ Test Only) | |
| Camera Control Interface | Visca Protocol | Visca Protocol | Visca Protocol | Visca Protocol |
| Effectiv numbers of Pixels | Approx. 2,100,000 pixels | Approx. 2,100,000 pixels | Approx. 2,100,000 pixels | Approx. 5,450,000 pixels |
| Image sensor | 1/2.8 inch Sony Starvis CMOS Sensor (Progressive Scan) | 1/3-type CMOS (Progressive Scan) | 1/2.8 inch Sony Starvis CMOS Sensor (Progressive Scan) | 1/1.8" Sony IMX178LQJ-C CMOS Sensor (Progressive Scan) |
| Signal system (HD) | 1920x1080p@25,30,50,60 1920x1080p@29.97,59.94 (optional) 1920x1080i@50,60 1920x1080i@59.94 (optional) 1280x720p@25,30,50,60 1280x720p@29.97,59.94 (optional) |
1920x1080p@25,30,50,60 1920x1080i@50,60 1280x720p@25,30,50,60 | 1920x1080p@25,30,50,60,29.97,59.94 1920x1080i@50,60,59.94 1280x720p@25,30,50,60,29.97,59.94 | 1440p 30(25)fps, 1080p 30(25)fps, 720p 30(25)fps |
| Lens | Optical 10x, f = 4.7 mm to 47.0 mm (F 1.6 to F 3.0) | Optical 20x, f = 4.7 mm to 94 mm (F 1.6 to F 3.5) | Optical 30x, f = 4.7 mm to 141 mm (F 1.5 to F 4.0) | Optical x36, f = 6.0 mm to 216 mm (F1.5 to F4.8) |
| Horizontal viewing angle (wide to tele) | 57.7 degrees(WIDE), 6.4 degrees(TELE) | 57.4 degrees(WIDE), 3.2 degrees(TELE) | 60.5 degrees(WIDE) to 2.3 degrees(TELE) | 49.27 degrees(WIDE) to 1.85 degrees(TELE) |
| Digital Zoom | 12x | 12x | 12x | 32x |
TL7055 Sony FCB EV-7520 Camera Evaluation Kit
Partnumber: TL7055-EVK-FCB-EV7520
The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.
Parts:
- Sony FCB EV-7520
- 3G-SDI & analog Board (TL7055)
- Base cable kit (TLCK-B6):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- 8 pin flying leads cable for the analog YsPbPr video output
- Power supply and control interface board (EK-PA1100)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- USB to serial adapter (TL-EVK-USB-SA)
- MCX to BNC connector cable (CK-MCX-BNC)
TL7055 Sony FCB-EV9500L Camera Evaluation Kit
Partnumber: TL7055-EVK-FCB-EV9500L
The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.
Parts:
- Sony FCB-EV9500L
- 3G-SDI & analog Board (TL7055)
- Base cable kit (TLCK-B6):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- 8 pin flying leads cable for the analog YsPbPr video output
- Power supply and control interface board (EK-PA1100)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- USB to serial adapter (TL-EVK-USB-SA)
- MCX to BNC connector cable (CK-MCX-BNC)
TL7055 Evaluation Kit
Partnumber: TL7055-EVK
The evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.
Parts:
- 3G-SDI & analog Board (TL7055)
- Base cable kit (TLCK-B6):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- 8 pin flying leads cable for the analog YsPbPr video output
- Power supply and control interface board (EK-PA1100)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- USB to serial adapter (TL-EVK-USB-SA)
- MCX to BNC connector cable (CK-MCX-BNC)
TL7055 Production Kit
Partnumber: TL7055
Production kit with all items needed for production. Powerful, cheap , competitive
Parts:
- 3G-SDI & analog Board (TL7055)
- Base cable kit (TLCK-B6):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- 8 pin flying leads cable for the analog YsPbPr video output
Base cable kit (TLCK-B6)
Partnumber: TLCK-B6
Cable kit for the TL7055 interface board
Parts:
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- 8 pin flying leads cable for the analog YsPbPr video output
Optional Parts Evaluation Kit
12 V AC to DC external power supply (PS-TE10A12)
- 12 V AC to DC external power supply designed for test & measurement and industrial applications. The Power Supply has a interchangeable blade kit for USA, Europe, United Kingdom and Australian.
USB 2.0 Cable (TL-EVK-USB2-A-MICROB)
- USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector
MCX to BNC connector cable (CK-MCX-BNC)
- MCX to BNC connector cable for the HD-SDI connection.
USB to serial adapter cable (TL-EVK-USB-SA)
- This USB to serial adapter enables you to connect a serial device to a free USB port. Connector: 1 x USB 1.1 type A male > 1 x serial RS-232 DB9 male
TL7055 AIVION Camera Evaluation Kit
Partnumber: TL7055-EVK-AZM-FSXXL
The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.
Parts:
- AIVION Block Camera AZM-FS10L, AZM-FS20L, AZM-FS30L or AZM-WQHS36L-LL
- 3G-SDI & analog Board (TL7055)
- Base cable kit (TLCK-B6):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- 8 pin flying leads cable for the analog YsPbPr video output
- Power supply and control interface board (EK-PA1100)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- USB to serial adapter (TL-EVK-USB-SA)
- MCX to BNC connector cable (CK-MCX-BNC)
