Camera Interfaces

TL7552 | HDMI Interface for KOEISHA Camera

High Definition Multimedia Interface for the KOEISHA KSM203

The TL7552 HDMI(DVI) Output Video Transceiver module from AIVION connect to the digital video interface of KOESHA`S block cameras and support several progressive and interlace HDTV formats. As no analog to digital conversion is done on these modules, excellent output image quality is achieved.

Features

  • Digital 4channel LVDS video input from camera
  • Full automatic video input standard detection
  • DVI video output over HDMI connector (TL7550 and TL7552 only)
  • Native digital signal processing chain for best image quality
  • RS232 and TTL level serial control interface
  • Robust RS485 differential serial control interface
  • Supply voltage 5V or 12V DC regulated
  • Board temperature monitoring with alert function

Supported Video Standards

The following HDTV video standards are supported by the TL7552. Note that video standard availability is always dependent on the capability of the camera block used.

  • 1080p output at 30Hz and 25Hz
  • 720p output at 60Hz, 50Hz, 30Hz and 25Hz
  • 1080i output at 60Hz and 50Hz

Blockdiagram TL7550

TL7550 Blockdiagram
Blockdiagramm TL7550

The TL7552 HDMI interface supports the KOEISHA KSM203

KSM203
KOEISHA KSM203
Model Video output Camera control interface Image Device Lens Angular Field of View (1080)
KSM203 Digital: Y/ Cb/ Cr 4:2:2 (LVDS) VISCA protocol Sony 1/2.8 type Exmor CMOS sensor 20xOptical f=4.7mm~94.0mm F1.6~F3.5 55.4°(Wide)~2.9°(Tele)

TL7552 Camera Evaluation Kit

Partnumber: TL7552-EVK-KSM203

The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.

Parts:

  • KOEISHA KSM203 Camera
  • HDMI Board (TL7552)
  • Base cable kit (TLCK-B):
    • 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
    • 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
  • Power supply and control interface board (EK-PA1100)
  • 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
  • USB to serial adapter (TL-EVK-USB-SA)
  • Bracket and screws (TL-EVK-BRA)
  • High Speed HDMI Cable. HDMI-A male > HDMI-A male 4K 2 meter (TL-EVK-HDMI)
  • AIVION Visca Camera Control Software

Optional Parts Evaluation Kit

Partnumber: PS-TE10A12

12 V AC to DC external power supply designed for test & measurement and industrial applications. The Power Supply has a interchangeable blade kit for USA, Europe, United Kingdom and Australian.

Partnumber: TL-EVK-USB-SA

This USB to serial adapter enables you to connect a serial device to a free USB port. Connector: 1 x USB 1.1 type A male > 1 x serial RS-232 DB9 male

TL7552 Evaluation Kit

Partnumber: TL7552-EVK

The evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.

Parts:

  • HDMI Board (TL7552)
  • Base cable kit (TLCK-B):
    • 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
    • 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
  • Power supply and control interface board (EK-PA1100)
  • 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
  • USB to serial adapter (TL-EVK-USB-SA)
  • Bracket and screws (TL-EVK-BRA)
  • High Speed HDMI Cable. HDMI-A male > HDMI-A male 4K 2 meter (TL-EVK-HDMI)
  • AIVION Visca Camera Control Software

Optional Parts Evaluation Kit

Partnumber: PS-TE10A12

12 V AC to DC external power supply designed for test & measurement and industrial applications. The Power Supply has a interchangeable blade kit for USA, Europe, United Kingdom and Australian.

Partnumber: TL-EVK-USB-SA

This USB to serial adapter enables you to connect a serial device to a free USB port. Connector: 1 x USB 1.1 type A male > 1 x serial RS-232 DB9 male

TL7552 Production Kit

Partnumber: TL7552

Production kit with all items needed for production. Powerful, cheap , competitive

Parts:

  • TL7552 Board
  • Base cable kit (TLCK-B):
    • 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
    • 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm

Base Cable Kit

Partnumber: TLCK-B

Cable kit for the TL7652 interface board

Parts:

  • 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
  • 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm