Camera Interfaces
TL7650 | Dual 3G HD-SDI AND DVI Interface for Tamron
HD-SDI AND HDMI Interface FOR the TAMRON Kamera MP1010M-VC
The TL7650 Dual 3G/HD-SDI and DVI(HDMI) Output Video Transceiver module from AIVION connect to the digital video interface of Tamron block cameras and support several progressive and interlace HDTV formats. As no analog to digital conversion is done on these modules, excellent output image quality is achieved.
Features
- Dual 3G/HD-SDI and DVI(HDMI) Output Video Transceiver module from
- Full automatic video input standard detection
- Dual 3G/HD-SDI outputs (TL7650 and TL7651 only)
- SDI outputs compliant to SMPTE424M / SMPTE292M
- DVI video output over HDMI connector (TL7650 and TL7652 only) + Native digital signal processing chain for best image quality
- RS232 and TTL level serial control interface
- Robust RS485 differential serial control interface
- Supply voltage 5V or 12V DC regulated
- Board temperature monitoring with alert function
Supported Video Standards
The following HDTV video standards are supported by the TL7650. Note that video standard availability is always dependent on the capability of the camera block used.
- 1080p output at 30Hz and 25Hz
- 720p output at 60Hz and 50Hz
- 1080i output at 60Hz and 50Hz
Blockdiagram TL7650

The TL7650 HD-SDI and HDMI Interface supports Tamron Module Cameras

Model | Video output | Camera control interface | Image sensor | Lens (wide to tele) | Horizontal viewing angle (wide to tele) |
MP1010M-VC | Y/Pb/Pr 4:2:2 (LVDS) | VISCA protocol | 1/3-type CMOS (Progressive Scan) |
10x optical zoom f=3.3 to 33.0 mm F1.8 to 3.4 |
58.2° to 6.9° |
MP1110M-VC | Y/Pb/Pr 4:2:2 (LVDS) | VISCA protocol | 1/3-type CMOS (Progressive Scan) |
10x optical zoom up to 16x digital zoom | 58.2° to 6.9° |
MP1010M-VC HDMI/HD-SDI Camera Evaluation Kit
Partnumber: TL7650-EVK-MP1010M-VC
The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours. You need for a complete test environment a USB to serial adapter (PS-TE10A12) and a 12 V Power Supply (PS-TE10A12).
Parts:
- Tamron MP1010M-VC Camera
- HD-SDI and HDMI Board (TL7650)
- Base cable kit (TLCK-B):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- Power supply and control interface board (EK-PA1100)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- USB to serial adapter (TL-EVK-USB-SA)
- Bracket and screws (TL-EVK-BRA)
- MCX to BNC connector cable (CK-MCX-BNC)
- High Speed HDMI Cable. HDMI-A male > HDMI-A male 4K 2 meter (TL-EVK-HDMI)
- AIVION Visca Camera Control Software
MP1110M-VC HD-SDI/HDMI Camera Evaluation Kit
Partnumber: TL7650-EVK-MP1110M-VC
The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours. You need for a complete test environment a USB to serial adapter (PS-TE10A12) and a 12 V Power Supply (PS-TE10A12).
Parts:
- Tamron MP1110M-VC Camera
- HD-SDI and HDMI Board (TL7650)
- Base cable kit (TLCK-B):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- Power supply and control interface board (EK-PA1100)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- USB to serial adapter (TL-EVK-USB-SA)
- Bracket and screws (TL-EVK-BRA)
- MCX to BNC connector cable (CK-MCX-BNC)
- High Speed HDMI Cable. HDMI-A male > HDMI-A male 4K 2 meter (TL-EVK-HDMI)
- AIVION Visca Camera Control Software
Optional Parts Evaluation Kit
Partnumber: PS-TE10A12
12 V AC to DC external power supply designed for test & measurement and industrial applications. The Power Supply has a interchangeable blade kit for USA, Europe, United Kingdom and Australian.
Partnumber: TL-EVK-USB-SA
This USB to serial adapter enables you to connect a serial device to a free USB port. Connector: 1 x USB 1.1 type A male > 1 x serial RS-232 DB9 male
Partnumber: TL-EVK-HDMI
High Speed HDMI Cable. HDMI-A male > HDMI-A male 4K 2 meter Slim Premium
TL7650 Evaluation Kit
Partnumber: TL7650-EVK
The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours. You need for a complete test environment a USB to serial adapter (PS-TE10A12) and a 12 V Power Supply (PS-TE10A12).
Parts:
- HD-SDI and HDMI Board (TL7650)
- Base cable kit (TLCK-B):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- Power supply and control interface board (EK-PA1100)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- USB to serial adapter (TL-EVK-USB-SA)
- Bracket and screws (TL-EVK-BRA)
- MCX to BNC connector cable (CK-MCX-BNC)
- High Speed HDMI Cable. HDMI-A male > HDMI-A male 4K 2 meter (TL-EVK-HDMI)
- AIVION Visca Camera Control Software
Optional Parts Evaluation Kit
Partnumber: PS-TE10A12
12 V AC to DC external power supply designed for test & measurement and industrial applications. The Power Supply has a interchangeable blade kit for USA, Europe, United Kingdom and Australian.
Partnumber: TL-EVK-USB-SA
This USB to serial adapter enables you to connect a serial device to a free USB port. Connector: 1 x USB 1.1 type A male > 1 x serial RS-232 DB9 male
Partnumber: TL-EVK-HDMI
High Speed HDMI Cable. HDMI-A male > HDMI-A male 4K 2 meter Slim Premium
TL7650 Production Kit
Partnumber: TL7650
Production kit with all items needed for production. Powerful, cheap , competitive
Parts:
- TL7650 Board
- Base cable kit (TLCK-B):
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
Base Cable Kit
Partnumber: TLCK-B
Cable kit for the TL7050 interface board
Parts:
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm