Camera Interfaces
TL9801 CVBS Video Transceiver
CVBS Video Interface for Block Cameras
The TL9801 interface from AIVION is a small form factor module for formatting and converting generic digital video streams to standard compliant formats.
Features
- CVBS analog video output - CVBS pass through from camera. Camera must be set to CVBS PAL or NTSC operating mode.
- USB2 UART based camera control
- Supply voltage: 9V to 12V DC regulated
Blockdiagram TL9801

TL9801 Sony FCB-EV7520A Camera Evaluation Kit
Partnumber: TL9801-EVK-FCB-EV7520A
The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.
Parts:
- Sony FCB-EV7520A
- CVBS Board (TL9801)
- TLCK-B | Base cable kit:
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector (TL-EVK-USB2-A-MICROB)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- MCX to BNC connector cable (CK-MCX-BNC)
- AIVION Visca Camera Control Software
The TL9801 CVBS Interface supports following Cameras:
- Sony FCB-EV7520A and the legacy Sony HD Block Cameras
- Tamron Block Cameras
- AIVION AZM Block Cameras
Sony FCB-EV7520A
Name | FCB-EV7520A |
Datasheet | FCB-EV7520A |
Video Output Digital | Digital : Y / Pb / Pr 4:2:2 (LVDS) (Y: 8 bit, C: 8 bit, Vsync, Hsync, Field, Clock) (SMPTE274M/SMPTE296M) |
Video Output Analog | (CVBS) PAL / NTSC |
Camera Control Interface | VISCA protocol (CMOS 5V Level) ; Baud Rate : 9.6 kbps, 19.2 kbps, 38.4 kbps, 115.2 kbps, Stop bit : 1 bit |
Effectiv numbers of Pixels | Approx. 2.130.000 pixels |
Image sensor | 1/2,8- type Exmor R CMOS |
Signal System(HD) | 1080p/60, 1080p/59.94, 1080p/50, 1080p/30, 1080p/29.97, 1080p/25, 1080i/60, 1080i/59.94, 1080i/50, 720p/60, 720p/59.94, 720p/50, 720p/30, 720p/29.97, 720p/25 |
Lens | 30x optical zoom ; f= 4.3 mm to 129 mm, F1.6 to F4.7 |
Horizontal viewing angle (wide to tele) | 63.7° to 2.3° |
Digital Zoom | 12x |

Tamron Module Cameras
Name | MP1110M-VC | MP2030M-GS |
Datasheet | MP1110M-VC | MP2030M-GS |
Video Output Digital | LVDS (Y/Pb/Pr 4:2:2) | LVDS |
Video Output Analog | CVBS | Analog VBS |
Camera Control Interface | Visca Protocol | Visca Protocol |
Effectiv numbers of Pixels | Approx. 4,080,000 pixels | Approx. 3,190,000 pixels |
Image sensor | 1/3-type CMOS (Progressive Scan) | 1/1.8 type Global shutter SONY IMX265LQR-C CMOS (Progressive Scan) |
Signal system (HD) | 1080p/60, 1080p/59.94, 1080p/50, 1080p/30, 1080p/29.97, 1080p/25, 1080i/60, 1080i/59.94, 1080i/50, 720p/60, 720p/59.94, 720p/50, 720p/30, 720p/29.97, 720p/25 | 1080p/60, 1080p/59.94, 1080p/50, 1080p/30, 1080p/25, 1080i/60, 1080i/59.94, 1080i/50, 720p/60, 720p/50 |
Lens | 10x optical zoom f=3.3 mm (wide) to 33.0 mm (tele) F1.8 to F3.4 | 30x optical zoom Nominal Value: f = 6.5 mm - 195 mm F1.6 to F5.3 |
Horizontal viewing angle (wide to tele) | 58.2 degrees to 6.9 degrees | 54 degrees to 2.0 degrees |
Digital Zoom | 16x | 16x |

AIVION Cameras
Name | AZM-FS10L | AZM-FS20L | AZM-FS30L2 |
Datasheet | AZM-FS10L | AZM-FS20L | AZM-FS30L2 |
Video Output Digital | LVDS Digital ITU-R BT.1120 - YcbCr4:2:2 16bits | LVDS Digital ITU-R BT.1120 - YcbCr4:2:2 16bits, 20bits (single LVDS mode) | LVDS Digital ITU-R BT.1120 - YcbCr4:2:2 16bits, 16bits |
Video Output Analog | SD CVBS (NTSC/PAL), 1.0Vp-p 75, Composite | SD CVBS (NTSC/PAL), 1.0Vp-p 75, Composite | |
Camera Control Interface | Visca Protocol | Visca Protocol | Visca Protocol |
Effectiv numbers of Pixels | Approx. 2,100,000 pixels | Approx. 2,100,000 pixels | Approx. 2,100,000 pixels |
Image sensor | 1/2.8 inch Sony Starvis CMOS Sensor (Progressive Scan) | 1/3-type CMOS (Progressive Scan) | 1/2.8 inch Sony Starvis CMOS Sensor (Progressive Scan) |
Signal system (HD) | 1920x1080p@25,30,50,60 1920x1080p@29.97,59.94 (optional) 1920x1080i@50,60 1920x1080i@59.94 (optional) 1280x720p@25,30,50,60 1280x720p@29.97,59.94 (optional) |
1920x1080p@25,30,50,60 1920x1080i@50,60 1280x720p@25,30,50,60 | 1920x1080p@25,30,50,60,29.97,59.94 1920x1080i@50,60,59.94 1280x720p@25,30,50,60,29.97,59.94 |
Lens | Optical 10x, f = 4.7 mm to 47.0 mm (F 1.6 to F 3.0) | Optical 20x, f = 4.7 mm to 94 mm (F 1.6 to F 3.5) | Optical 30x, f = 4.7 mm to 141 mm (F 1.5 to F 4.0) |
Horizontal viewing angle (wide to tele) | 57.7 degrees(WIDE), 6.4 degrees(TELE) | 57.4 degrees(WIDE), 3.2 degrees(TELE) | 60.5 degrees(WIDE) to 2.3 degrees(TELE) |
Digital Zoom | 12x | 12x | 12x |
TL9801 MP1110M-VC Camera Evaluation Kit
Partnumber: TL9801-EVK-MP1110M-VC
The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.
Parts:
- Tamron MP1110M-VC Camera
- CVBS Board (TL9801)
- TLCK-B | Base cable kit:
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector (TL-EVK-USB2-A-MICROB)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- MCX to BNC connector cable (CK-MCX-BNC)
- AIVION Visca Camera Control Software
TL9801 MP2030M-GS Camera Evaluation Kit
Partnumber: TL9801-EVK-MP2030M-GS
The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.
Parts:
- Tamron MP2030M-GS Camera
- CVBS Board (TL9801)
- TLCK-B | Base cable kit:
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector (TL-EVK-USB2-A-MICROB)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- MCX to BNC connector cable (CK-MCX-BNC)
- AIVION Visca Camera Control Software
TL9801 Evaluation Kit
Partnumber: TL9801-EVK
The evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.
Parts:
- CVBS Board (TL9801)
- TLCK-B | Base cable kit:
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector (TL-EVK-USB2-A-MICROB)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- MCX to BNC connector cable (CK-MCX-BNC)
- AIVION Visca Camera Control Software
TL9801 Production Kit
Partnumber: TL9801
Production kit with all items needed for production. Powerful, cheap , competitive
Parts:
- TL9801 Board
- TLCK-B | Base cable kit:
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
TL9801 AIVION AZM Camera Evaluation Kit
Partnumber: TL9801-EVK-AZM-FSXXL
The camera evaluation kit contains all items to easily connect camera, interface & monitor. Ready to evaluate the camera in minutes rather than hours.
Parts:
- AZM-FS10L, AZM-FS20L, AZM-FS30L2
- CVBS Board (TL9801)
- TLCK-B | Base cable kit:
- 10 pin flying leads cable for power and control(RS232/TTL), length 15cm
- 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm
- USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector (TL-EVK-USB2-A-MICROB)
- 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. (PS-TE10A12)
- MCX to BNC connector cable (CK-MCX-BNC)
- AIVION Visca Camera Control Software